Appendix b, Using services, General – Brother NC9100H User Manual
Page 162
APPENDIX A - 3
Appendix B
Using Services
General
A service is a resource that can be accessed by computers that wish
to print to the Brother Print/Fax server. The Brother Print/Fax server
provides the following predefined services (do a SHOW SERVICE
command in the Brother Print/Fax server remote console to see a list
of available services): Enter HELP at the command prompt for a list
of supported commands.
Where xxxxxx is the last six digits of the Ethernet address (for
example, BRN_310107_P1).
Service (Example)
Definition
BINARY_P1
TCP/IP binary, NetBIOS service.
TEXT_P1
TCP/IP text service (adds carriage return after
each line feed).
POSTSCRIPT_P1
PostScript service (switches PJL-compatible
printer to PostScript mode).
PCL_P1
PCL service (switches PJL-compatible printer to
PCL mode).
BRN_xxxxxx_P1_AT
AppleTalk and LPD service for Mac OS 8.6 or
later.
BRN_xxxxxx_P1
NetWare service and AppleTalk service with
Quickdraw Driver for Mac OS 8.6 - 9.1, 10.1-
10.2.1 or greater (TCP/IP is enabled for
backwards compatibility).