Brother NC9100H - Manual (Page 74)

PRINTING FROM A MACINTOSH ® 7 - 4
1 Open the Chooser from the Apple Menu on the Macintosh ® ,
and then click on the LaserWriter icon (if necessary, select the
appropriate AppleTalk zone from the Network Control
Panel).
Figure 2 Macintosh Chooser
2 Click on the appropriate Print/Fax server and close the
Chooser program. You should now be able to print from the
Macintosh.
If you cannot see the Print/Fax server, first make sure that
your cabling is correct and that you have enabled EtherTalk
from your Macintosh Network Control Panel. You may also
need to force the print server into the correct AppleTalk zone
using the BRAdmin Professional utility or a web browser.