Brother NC9100H - Manual (Page 71)

7 - 1 PRINTING FROM A MACINTOSH ®
7
7
Printing from a Macintosh
®
Printing from a Macintosh
®
Using
AppleTalk
®
and TCP/IP or Simple
Network Configuration capabilities
This chapter explains how to configure the PostScript driver on a
Network. For more information on how to configure the default Quick
Draw driver on a Network, see the Quick Setup Guide included with
the machine.
Overview
Brother print servers support the AppleTalk protocol running over
Ethernet (also known as EtherTalk). This allows Macintosh
® users to
print at the same time as all other Ethernet network using the
AppleTalk (also referred to as EtherTalk) protocol.
With the release of System 8.6 or later, Apple introduced a TCP/IP
printing capability. This allows Macintosh
® users to send print jobs
using the TCP/IP protocol.
With the release of OS/X 10.2, Apple ® introduced support for Simple
Network Configuration capabilities. Simple Network Configuration
supports automatic network configuration. If you choose to use the
Simple Network Configuration of your product, you usually do not
need to configure any IP address settings yourself.
For updated information on printing from a Macintosh
®
visit the
Brother Solutions web site at: http://solutions.brother.com