Lenze Global Drive Cam Loader - Manual (Page 48)

Global Drive Cam Loader
Control via script files
Syntax of the command line start
48 1.1 EN - 05/2005
L
7.3 Syntax of the command line start
Use the following syntax to start the Cam Loader in batch mode:
[ The /batch parameter ensures the script-controlled execution of the program
functions.
[ The script file parameter indicates the script file.
– It is possible to use absolute and relative path names. A relative path always refers
to the current directory.
[ The entry of the log file parameter is optional. It contains the name of the log file in
which all Cam Loader activities and error messages are recorded.
– If you do not enter a path for the log file the log file will be saved in the same
directory as the script file.
– If you do not enter the log file parameter Cam Loader does not create a log file.
Example:
LCDownload LC download
0 = no
1 = yes (no compilation, only LC download)
DriveType Target system
0 = 9300 servo PLC / ECS
1 = 9300 EK (9300 servo cam profiler)
DeviceName Name of the target system in the name area of the DriveServer
ParameterSetFile Parameter file
only with 9300 EK (9300 servo cam profiler)
LC-Path Directory for the LCx file
PathCurveXXX ASCII file containing the motion profiles for product XXX
PathPositionXXX ASCII file containing the position markers for product XXX
PathContactorXXX ASCII file containing the cam tracks for product XXX
SegmentedXXX Segmentation
0 = no
1 = yes
PathCurve_B002 ASCII file with the motion profiles for product XXX (
SegmentedXXX=1
)
PathCurve_C002 ASCII file with the motion profiles for product XXX (
SegmentedXXX=1
)
PathCurve_D002 ASCII file with the motion profiles for product XXX (
SegmentedXXX=1
)
PathCurve_E002 ASCII file with the motion profiles for product XXX (
SegmentedXXX=1
)
Key Parameter
CamLoader.exe /batch script file [log file]
CamLoader.exe /batch MyScript.cmd MyLogfile.txt