Lenze Global Drive Cam Loader - Manual (Page 41)

L
1.1 EN - 05/2005 41
Global Drive Cam Loader
Operation
Saving a project
6.6 Saving a project
X
Click the icon or select FileWSave to save the project.
I
Tip!
Save your project at regular intervals to protect your data against power failures or
system problems.
If you want to create a backup project on another data carrier or in another direc-
tory use the command FileWSave as... instead.
4Saving a project under another name
6.7 Saving a project under another name
X
How to save an open project under another name...
1. Select FileWSave as... to open the Save as dialog box.
2. Go to the Save as list field and select the directory in which you want to store the
project.
3. Go to the Name input field and enter a name for the new project.
4. Click OK to save the project under the specified name in the selected directory and
close the dialog box.
• If you select the command FileWSave the project will be saved with the new set-
tings.
)
Note!
If you open several Cam Loader projects simultaneously this function refers to
the project in the active window.
)
Note!
If you open several Cam Loader projects simultaneously this function refers to
the project in the active window.