Lenze Global Drive Cam Loader - Manual (Page 45)

L
1.1 EN - 05/2005 45
Global Drive Cam Loader
Control via script files
Script files
7.2 Script files
Script files are divided into sections. Different keys can be entered in the sections, therefore
they are very similar to typical Windows INI files.
[ Sections are put into square brackets. The following lines list the keys for a specific
section.
[ A key consists of a key name followed by an equal sign and a key value.
[ Comments can be added, the comment must, however, be separated from the key
value by a semicolon.
[ It is not possible to enter more than one key per line.
Example of a script file
)
Note!
If required, it is possible to edit the script files with any ASCII text editor
(e.g. Notepad).
[CamLoader]
NumberOfSlaves=3
NumberOfProducts=2
MasterName=Master
MasterUnit=°
MasterMinimum=0.0000
MasterMaximum=360.0000
MasterGear1=5.00
MasterGear2=1.00
MasterFeed=360.0000
MasterIncrement=65536.00
MasterCycles=60.00
[Product001]
Name=Product2
Number=2
ID=2
[Product002]
Name=Product3
Number=1
ID=3
[Slave001]
Name=Slave1
Unit=mm
Minimum=0.0000
Maximum=1000.0000
Gear1=10.00
Gear2=2.00
Feed=180.0000
Increment=65536.00
NumberOfCurves=2
Points=50
DataModel=1
LCDownload=0
DriveType=1
DeviceName=