Lenze Global Drive Cam Loader - Manual (Page 42)

Global Drive Cam Loader
Operation
Creating a template for a script file
42 1.1 EN - 05/2005
L
I
Tip!
This way you can create a new project or a backup project on another data carrier
or in a directory other than the project directory on the basis of the current project.
6.8 Creating a template for a script file
The Cam Loader can automatically create a script file for an open project which can be used
to start the Cam Loader without user interface, e.g. on an IPC.
[ Detailed information about the use of script files for Cam Loader control can be found
in chapter " Control via script files ".
(^ 44)
X
Select the command FileWCreate script files to create a script file for the current
project.
6.9 Closing a project
X
Select FileWClose to close the open project.
)
Note!
The script file can be found under the project name in the corresponding project
directory. It has the ending ".cmd".
• In addition, one script file each will be created for each axis and stored under
the name of the axis in the corresponding axis subdirectory.
)
Note!
If you open several Cam Loader projects simultaneously this function refers to
the project in the active window.