2 possible causes and remedies, Profinet: exist. conn. to 8400 lost [0x01bc3100, Profinet: memory: no access [0x01bc5531 – Lenze E84DxxxxxxxxxR User Manual
Page 62: Profinet: memory: read error [0x01bc5532, Profinet: memory: write error [0x01bc5533, Profinet: restart by watchdogreset [0x01bc6010, Possible causes and remedies, 0x01bc3100, 0x01bc5531, 0x01bc5532
Communication manual 8400 protec PROFINET
Error messages
Possible causes and remedies
62
L
EDS84DPNET EN 4.0 - 11/2010
12.2
Possible causes and remedies
This chapter contains all PROFINET error messages in numerical order of the error number.
Possible causes and remedies as well as responses to the error messages are described in
detail.
Tip!
You will find a list of all PROFINET error messages in alphabetical order in the
previous chapter "
Short overview (A-Z) of the PROFINET error messages
"
.
PROFINET: Exist. conn. to 8400 lost [0x01bc3100]
PROFINET: Memory: No access [0x01bc5531]
PROFINET: Memory: Read error [0x01bc5532]
PROFINET: Memory: Write error [0x01bc5533]
PROFINET: Restart by watchdogreset [0x01bc6010]
Response (Lenze setting in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
• Network cable (plug) is defective.
• Network cable at PROFINET terminal X256 or X257 is
disconnected.
• Voltage supply is interrupted.
Check cables and connections.
Plug in network cable at PROFINET terminal X256 or
X257.
Response (Lenze setting in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Memory could not be accessed.
Send device with error description to Lenze.
Response (Lenze setting in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Parameter could not be read.
Send device with error description to Lenze.
Response (Lenze setting in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Parameter could not be written.
Send device with error description to Lenze.
Response (Lenze setting in bold)
Setting: not possible
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause
Remedy
Device is defective.
Send device with error description to Lenze.