12 error messages, Error messages, Communication manual 8400 protec profinet – Lenze E84DxxxxxxxxxR User Manual
Page 61
EDS84DPNET EN 4.0 - 11/2010
L
61
Communication manual 8400 protec PROFINET
Error messages
Short overview (A-Z) of the PROFINET error messages
12
Error messages
This chapter supplements the error list in the software manual and the »Engineer« online
help for the Inverter Drive 8400 protec by the PROFINET error messages.
12.1
Short overview (A-Z) of the PROFINET error messages
The following table contains all PROFINET error messages in alphabetical order with the
preset error response as well as – if applicable – the parameter for setting the error
response.
Tip!
When you click the cross-reference in the last column, you will get a detailed
description (causes and remedies) of the corresponding error message.
Software manual/»Engineer« online help for the Inverter Drive 8400 protec
General information on diagnostics & fault analysis and error messages is
provided here.
Error text
Error type
Subject area
no.
Error no.
Adjustable
in
Detailed
information
PROFINET: Data_Exchange status quit
0: None
444
25905
PROFINET: Data output status bad
4: Warning locked
444
25859
-
PROFINET: Error: Lenze setting loaded
1: Error
444
25632
-
PROFINET: Exist. connect. to 8400 lost
1: Error
444
12544
-
PROFINET: Internal error
1: Error
444
24832
-
PROFINET: Internal error
1: Error
444
24593
-
PROFINET: Internal error
1: Error
444
24833
-
PROFINET: Internal error
1: Error
444
26192
-
PROFINET: Invalid module configuration
1: Error
444
25648
-
PROFINET: Invalid parameter set
1: Error
444
25631
-
PROFINET: IP address error
1: Error
444
25907
-
PROFINET: Memory: No access
1: Error
444
21809
-
PROFINET: Memory: Read error
1: Error
444
21810
-
PROFINET: Memory: Write error
1: Error
444
21811
-
PROFINET: Record parameter: Invalid read
4: Warning locked
444
25857
-
PROFINET: Record parameter: Invalid write
4: Warning locked
444
25858
-
PROFINET: Restart by watchdogreset
1: Error
444
24592
-
PROFINET: Safety communication timeout
4: Warning locked
444
26128
-
PROFINET: Safety connect error
4: Warning locked
444
26131
-
PROFINET: Safety init error
4: Warning locked
444
26130
-
PROFINET: Safety parameter timeout
4: Warning locked
444
26129
-
PROFINET: Stack init error
1: Error
444
25908
-
PROFINET: Station name error
1: Error
444
25906
-