Lenze E84DxxxxxxxxxR - Manual (Page 24)

Communication manual 8400 protec PROFINET
Commissioning
Configuring the PROFINET IO controller
24
L
EDS84DPNET EN 4.0 - 11/2010
5.2 Configuring the PROFINET IO controller
First you have to configure the IO controller for communication with the Inverter Drive
8400 protec.
Configuration for the IO controller
For configuring PROFINET, the current PROFINET device description file (XML) of the
Inverter Drive 8400 protec must be imported in the IO controller.
The current device description file GSDML-Vx.z-Lenze-8420-PNabb-yyyymmdd.xml can be
found on the Lenze Internet pages further on in the "Services & Downloads" area at:
www.Lenze.com
Definition of the user data length
The user data length is defined during the initialisation phase of the IO controller.
The Inverter Drives 8400 protec support the configuration of max. 16 process data words
(max. 32 bytes).
Description of the device data base file
Example of device data base file selection
 "PCD (8W) AR cons." = process data words (8 words)
 "Safety (4W) AR" = safety data words (4 words)

Tip!
A detailed consistency description is provided in the chapter "
Consistent
parameter data "
( 53)
.
Wildcard in the file name "GSDML-Vx.z-Lenze-8420-PNabb-yyyymmdd.xml"
x
Main version of the GSDML scheme used
z Subversion of the GSDML scheme used
a Major version of the software version Starting from this 8400 protec PROFINET version, the
device description file can be used.
bb Minor version of the software version
yyyy Year
mm Month
dd Day
Selection text Parameter data
(with consistency)
Process data
(with consistency)
Assigned
I/O memory
PCD (nW) AR cons. - n words n words
Safety (4W) AR - 4 words 4 words
n = 1 ... 16 process data words