Lenze E84DGFCT - Manual (Page 64)

Communication manual 8400 motec EtherCAT®
Error messages
Possible causes and remedies
64
L
EDS84DMOTECAT EN 2.1 - 11/2012
Internal error [0x01bc6011]
Internal error [0x01bc6100]
Internal error [0x01bc6101]
Invalid parameter record [0x01bc641f]
Error: Lenze setting loaded [0x01bc6420]
Invalid module configuration [0x01bc6430]
Response (Lenze setting printed in bold) Setting: C01501/2 (; adjustable response)
; No response : Error Fault ; Warning locked
Cause Remedy
Device is damaged. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: C01501/2 (; adjustable response)
; No response : Error Fault ; Warning locked
Cause Remedy
Device is damaged. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: C01501/2 (; adjustable response)
; No response : Error Fault ; Warning locked
Cause Remedy
Device is damaged. Send the device and a description of the fault to Lenze.
Response (Lenze setting printed in bold) Setting: not possible
No response : Error Fault Warning locked
Cause Remedy
No active parameter set could be loaded • Repeat download of the application (including
module).
• Send the device and a description of the fault to
Lenze.
Response (Lenze setting printed in bold) Setting: not possible
No response : Error Fault Warning locked
Cause Remedy
Access to parameter set was not possible. • Repeat download of the application (including
module).
• Send the device and a description of the fault to
Lenze.
Response (Lenze setting printed in bold) Setting: not possible
No response Error Fault : Warning locked
Cause Remedy
The number of configured process data words via
EtherCAT does not correspond to the length saved to the
memory module.
Save parameter set via C00002/11 = 1.