Lenze E84DGFCT - Manual (Page 42)

Communication manual 8400 motec EtherCAT®
Process data transfer
Configuring the port interconnection of the process data objects (PDO)
42
L
EDS84DMOTECAT EN 2.1 - 11/2012
For some process data words, you can also assign signals to the individual bits via
the and
buttons.
 Select the signals and then confirm the selection with OK.
The current interconnection is only displayed if the following has been set for the
control mode in code C00007 = 40: Network (MCI/CAN).
5. Via standard device code C00002, execute the "11: Save all parameter sets" device
command to activate the changed port interconnection and to save it to the
memory module.