4 initial switch-on, Initial switch-on, Communication manual 8400 motec ethercat – Lenze E84DGFCT User Manual

Page 31

Text mode
Original mode

EDS84DMOTECAT EN 2.1 - 11/2012

Communication manual 8400 motec EtherCAT®

Commissioning

Initial switch-on

6.4

Initial switch-on

Establishing communication

 To establish communication, the controller must be supplied with mains voltage.
 The external voltage supply serves to keep up EtherCAT communication in the event of

a main supply failure.

External voltage supply

( 24)

 During mains connection, all parameters (codes) are read.
 If an error occurs, the error message "CE04: MCI communication error" (error no.

01.0127.00002) is output.

 Addressing can be carried out automatically via the EtherCAT master or manually via

codes in the »Engineer«.

Address allocation

( 30)