3 residual hazards, Residual hazards – Lenze E84DGFCT User Manual
Page 12
Communication manual 8400 motec EtherCAT®
Safety instructions
Device and application-specific safety instructions
12
L
EDS84DMOTECAT EN 2.1 - 11/2012
Only qualified personnel may work with and on Lenze drive and automation
components. In accordance with IEC 60364 and CENELEC HD 384, these are persons ...
– who are familiar with installing, mounting, commissioning, and operating the
product.
– who have the qualifications necessary for their occupation.
– who know all regulations for the prevention of accidents, directives and laws
applicable on site and are able to apply them.
2.2
Device and application-specific safety instructions
During operation, the Communication Unit must be connected to the Wiring Unit and
the Drive Unit.
In case of external voltage supply, always use a separate power supply unit, safely
separated in accordance with EN 61800-5-1 in every control cabinet ("SELV" / "PELV").
2.3
Residual hazards
Device protection
The Communication Unit contains electronic components that can be damaged or
destroyed by electrostatic discharge.
Documentation for "Inverter Drives 8400 motec", control system, system/
machine
All the other measures prescribed in this documentation must also be
implemented. Observe the safety instructions and application notes stated in
this manual.