Lenze E94AYCEC - Manual (Page 12)

3 Product description
3.1 Application as directed
12
Lenze · E94AYCEC Communication module (POWERLINK CN) · Communication Manual · DMS 3.0 EN · 08/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Product description
3.1 Application as directed
The communication module ...
• is an accessory module that can be used in conjunction with the following standard devices:
• is a device intended for use in industrial power systems.
• should only be used under the operating conditions prescribed in this documentation.
• can only be used in POWERLINK networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and hardware and software version of the communication module are
specified on the nameplate:
[3-1] Identification data
Product series Type designation From hardware
version
From software
version
Servo Drives 9400 HighLine E94AxHExxx VB 01.50
Servo Drives 9400 PLC E94AxPExxxx VA 02.00
Regenerative power supply module E94ARNxxxx VA 01.00
E94YCEI003C
1 Type designation (type)
E94 Product series
A
Version
Y Module identification: Extension module
C Module type: Communication module
EC POWERLINK CN
2 Hardware version (HW)
3 Software version (SW)
Type
HW Ver.
SW Ver.
MAC ID