Lenze E94AYCEC - Manual (Page 100)

10 Parameter reference
10.3 Parameters of the communication module for slot MXI2
100
Lenze · E94AYCEC Communication module (POWERLINK CN) · Communication Manual · DMS 3.0 EN · 08/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14225
C14229
C14231
Parameter | Name:
C14225 | EPL MN: Max. user data RPDO
Data type: UNSIGNED_16
Index: 10350 = 0x286E
EPL index: See subcodes
The code defines the reserved user data length of the PRes frames. Each subcode number corresponds to an EPL
node with the same node ID.
The subcode describes the PRes frames received. The value must be within the limits of 36 ... 1490 bytes.
The values are upper limit values for the total size of the PDO mappings which must be defined each one of the
codes C14231 ... C14240 for PRes frames received.
In the configured state, the values stored for the EPL nodes must be identical to the corresponding C14072 entries.
C14066 must have an identical value in all EPL nodes of the network.
Setting range (min. value | unit | max. value)
0 Byte 1490
Subcodes Lenze setting Info EPL index
C14225/1 0 byte Managing node 0x1F8D.0xF0
C14225/2 0 byte Diagnostics device 0x1F8D.0xFD
C14225/3 0 byte router 0x1F8D.0xFE
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14229 | EPL multi-stage node declaration MN
Data type: UNSIGNED_8
Index: 10346 = 0x286A
EPL index: See subcodes
This code indicates in which multiplexed cycle the node is queried. The value entered must not exceed the value in
code C14074 .
If, for instance, the value "3" is entered in code C14074 , the multiplexed cycle is repeated every three cycles. If now
the value "3" is entered for one node in C14229/x, it is always queried only in the second cycle of the three
multiplexed cycles.
Setting range
(min. value | unit | max. value)
0 Cycles 255
Subcodes Lenze setting Info EPL index
C14229/1 0 cycles Managing node 0x1F9B.0xF0
C14229/2 0 cycles Diagnostics device 0x1F9B.0xFD
C14229/3 0 cycles router 0x1F9B.0xFE
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14231 | EPL RPDO
Data type: UNSIGNED_64
Index: 10344 = 0x2868
EPL index: See subcodes
EPL RPDO-1
Subcodes
Lenze setting Info EPL index
C14231/1 0 EPL RPDO 0x1600.0x01
... ... ... ...
C14231/32 0 EPL RPDO 0x1600.0x20
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT