3 create a project folder, 4 commissioning the field devices, Create a project folder – Lenze PROFIBUS Controller-based Automation User Manual

Page 27: Commissioning the field devices, Commissioning the field devices ( 27), 6commissioning of profibus

Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.3 EN · 04/2014 · TD17

Commissioning of PROFIBUS

6.2

Detailed commissioning steps

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.2.3

Create a project folder

Create a project folder on the Engineering PC.
Use this project folder to store the data generated in the following different project configuration

steps:

• Project data created in the »Engineer« or »EASY Starter«
• The project file created in the »PLC Designer«



Tip!
Create a separate project folder for every PROFIBUS configuration and store the project

files.

6.2.4

Commissioning the field devices

Parameterise the Lenze field devices connected to the PROFIBUS network by means of the

»Engineer« or »EASY Starter«.
PROFIBUS is exclusively configured using the »PLC Designer«.
PROFIBUS settings of the field devices which have possibly been carried out with the »Engineer«/

»EASY Starter« are overwritten.



Tip!
We recommend to commission each field device individually and then integrate them into

the PLC program.



Documentation of the Lenze field devices
Detailed information about the commissioning of the Lenze field devices is provided

here.