Lenze PROFIBUS Controller-based Automation - Manual (Page 20)

4 The Lenze automation system with PROFIBUS
4.2 PROFIBUS hardware for Lenze Controllers
20
Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2 PROFIBUS hardware for Lenze Controllers
MC-PBM / MC-PBS communication card
• The MC-PBM communication card serves to connect a Lenze Controller as PROFIBUS master to
a PROFIBUS network.
• The MC-PBS communication card serves to connect a Lenze Controller as PROFIBUS slave to a
PROFIBUS network.
 Using the Lenze Controller as a PROFIBUS slave ( 15)
[4-5] MC-PBM / MC-PBS communication card
 Technical data of the MC-PBM / MC-PBS communication card ( 22)
Use
The MC-PBM / MC-PBS communication card is installed in the respective slot of the Lenze
Controller.
MC-PBx-001
A Front panel
B Printed circuit board
C Coding
D Connection of Lenze Controller
E PROFIBUS connection ( 23)
F LED status displays of the MC-PBM
communication card ( 47)
LED status displays of the MC-PBS
communication card ( 48)
0
1
3
2
PROFI
BUS
MC-PBx
SYS
ST0
ST1
ST2
5
4
Example: Lenze Controller 3231 C with MC-PBM communication card
MC-PBM MC-PBM communication card
PBM1
PROFIBUS connection ( 23)