Leica Biosystems CM3600 XP - Manual (Page 39)

39 Leica CM3600 XP – Cryomacrotome
Once initialization has been started, it can only be interrupted
by pressing the emergency stop switch. For further informa-
tion, refer to chapter 3.4.1.
After the initialization procedure has been completed, the color of the
INIT button will first change from yellow to green and after a few sec-
onds, the caption on the button will change from INIT to AUTOMATIC.
The microtome is now ready for service. For further information, refer to
chapter 6.4.9.
6. Software