Landoll 2000 Series Row Crop Cultivator - Manual (Page 37)

OPERATION AND MAINTENANCE
4-11
Storage
The service life of the cultivator will be extended by the
following proper off-season storage practices:
1.
Completely clean the unit and inspect the machine
for worn or defective parts. Replace defective and
worn parts, as needed, to avoid delays the following
season.
2. Repaint all areas where the original paint film is worn
off.
3. Grease all exposed metal surfaces of shanks, points,
and coulters.
4. Lubricate as suggested in “Lubrication” on
page 4-10.
5. Store the unit in a shed, or under a tarpaulin, to
protect it from the weather. The ground tools and
tires should rest on a board or other device to keep
them out of the soil.
6. Fully extend the hydraulic gauge wheel cylinders,
and place the cylinder lockouts in the transport lock
position over the cylinder rods. Secure the lockouts
with the lockout pins.
7. Always place the swivel jack on the interior mount
before setting the machine in motion.