beautypg.com

Troubleshooting guide – Landoll 2111 Coulter Chisel User Manual

Page 84

background image

5-2

F-719-0413 Edition

TROUBLESHOOTING GUIDE

HYDRAULIC - ENTIRE UNIT SETTLING

Depth stop valve not working

Repair valve

COULTER GANG PLUGGING

Operating depth too deep

Raise unit.

Conditions too wet

Wait until conditions more favorable.

COULTER GANG WILL NOT TURN OR
PUSHES SOIL

Depth set too deep for loose or wet
conditions

Raise implement or wait until conditions

are more favorable

Gang bearing failure

Replace bearing

COULTER BLADES LOOSE AND/OR
SHEARING ROLL PIN

Gang not tightened properly

Retighten gang shafts to 1200-1500 ft.-lbs.

If gangs have ran loose, gangs may
require disassembly to remove soil to
properly torque gang shafts. Replace
any worn components, shafts/spools,
etc.

PROBLEM

PROBABLE CAUSE

SOLUTION