Figure 4-9: installed transport locks, Warning – Landoll 2111 Coulter Chisel User Manual
Page 78

4-10
F-719-0413 Edition
OPERATION AND MAINTENANCE
4.
Check that tires are of proper size, load rating, and
inflated to manufacture specifications before
transporting. Check wheel lug bolts to insure
tightness.
5.
Know the transport heights and widths of the unit
before transporting. Attachments can increase the
transport dimensions of the implement. Use caution
when transporting near bridges and power lines.
WARNING
6.
Raise the unit to full transport height.
7.
Install transport locks on both lift cylinders. Do not
depend solely on implement hydraulics for transport.
(See Figure 4-9.)
Figure 4-9: Installed Transport Locks
WARNING
8.
Transport during daylight hours whenever possible.
Always use flashing warning lights, except where
such use is prohibited by law. Make sure lights,
reflectors and SMV emblem are clearly visible and
operating. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view before
transporting.
Electrocution can occur without direct contact.
1-1/2 x 16 TRANSPORT
LOCKOUT
L PIN
1/8 HAIR PIN
2110-translockon
Failure to use transport lock pins during
transport may result in permanent equipment
damage, serious injury, or death.