Landoll SL/SLB/SLP/SLPB/SLPB TURFMAKER III - Manual (Page 29)

ASSEMBLY INSTRUCTIONS
2-19
Acre Meter Kit 5K275 (Optional)
NOTE
The acre meter kit consists of three main parts, the acre
meter, the pick-up and the magnet wheel, is mounted on
the left side of the front seedbox.
1. Use the acre meter bracket as a guide and drill two
13/32” holes into seedbox at location shown in
illustration. Then attach the acre meter bracket as
shown with two 3/8-16 x 1” bolts, lock washers and
nuts. See Figure 2-26.
2. Attach the 5K332 pick up switch bracket to the 5K209
clutch support bracket with two #10-24 x 3/4”
machine screws, flat washers, lock washers and
nuts. Do not tighten screws at this time.
3. Attach the pick up switch to the top of the 5K332
bracket with two #8-32 x 1 1/4” machine screws, flat
washers, lock washers and nuts. Do not tighten
screws at this time.
Figure 2-26: Electronic Acre Meter
Acre Meter Bracket
Pick Up Switch
Bracket
5K332
Machine Screw,
#10-24 X 3/4”
Lock Washer, #10
Nut, #10-24
Machine Screw,
#8-32 X 1 1/4”
Flat Washer, #8
Lockwasher, #8
Nut, #8-32
Pick Up Switch
Adhesive
Mount Base
Magnet w/Wheel
Screw, 3/8-16 X 1”
Lockwasher, 3/8
Nut,3/8-16
Clutch Support Bracket 5K209