beautypg.com

Assembly instructions, Chapter 2 – Landoll SL/SLB/SLP/SLPB/SLPB TURFMAKER III User Manual

Page 11

background image

2-1

Chapter 2

Assembly Instructions

CAUTION

The intent of this chapter is to provide instruction,
allowing you to safely and correctly assemble your
Brillion product.

NOTE

In most of the following illustrations, the Pick Up model is
shown. Pull Type seeders are assembled in the same
way unless otherwise noted.

If your seeder was shipped with unattached roller
assemblies, follow the procedure on Pages 2-1 through
2-8.

If your rollers were assembled at the factory, See
Page 2-9.
Pull Type Seeder Assembly.

Step 1

Support the Frame and Seedbox Assembly with a hoist
or by similar means capable of supporting its weight
without tipping. See Figure 2-1.

Figure 2-1: Pull Type Seeder Step 1

Do not work on or under this machine unless
securely

blocked and supported by a hoist or

tractor or by other sufficient means!

FRONT

LEFT SIDE

RIGHT SIDE

Frame & Seedbox Assembly

Pull Type Model Seeder