JUMO 706581 LOGOSCREEN nt Operating Manual - Manual (Page 151)

151
21 Configuration - Counters/Integrators
21.2 Function … Specific Setting
Overview
Function Function determines whether the channel that was selected will be used as a
counter integrator, operating time counter, high-speed counter, or for flow rate
measurements.
Save Save determines whether the event will be saved for the evaluation software
PCA3000, i.e. whether it can be evaluated in PCA3000. The parameter and
corresponding result are not available in the function Flow rate quantity.
Counter The binary signal will be counted.
Integrator The analog signal will be integrated.
Operating time The operating time will be acquired using a previously
set binary signal.
High-speed
counters B1 —
B18
One of up to 6 fast binary inputs will be recorded (B1,
B2, B9, B10, B17, B18). Depending on the module
equipment level, not all high-speed counters may be
available.
Flow rate quantity
B1 … B18 One of up to 6 fast binary inputs will be used to measure
flow rate quantity (B1, B2, B9, B10, B17, B18).
Depending on the module equipment level, not all binary
inputs may be available.
Yes The counter/integrator count is saved for
PCA3000.