JUMO 706581 LOGOSCREEN nt Operating Manual - Manual (Page 103)

103
11 Configuration - Device Data
Overview
Device
(instrument)
name The device name (up to 15 characters) is used for the identification of the
paperless recorder in the instrument (Device info menu), in the setup program
or in the PCA Communications software PCC.
Language First choose between the two instrument languages. All texts (fixed and
variable ones) can be altered through the setup program. Individual texts in
any language can be implemented in this way.
Supply
frequency Set the frequency of the supply voltage used.
Temperature
unit Set the temperature unit of your choice. When configuring the analog
channels, the measurement range limits are shown in the chosen unit.
Integrator with
Out of Range The response of the integrator (totalizer) channels is set here if the value of the
input signal for an integrator is invalid.
Memory alarm
(warning) The memory alarm (warning) is triggered when the available measurement
data memory has fallen below the configured value. With regard to the
memory alarms, a distinction is made between
- “readout via CF card”,
- “readout via interface” and
- “internal memory”.
Stop Integration is stopped.
Invalid Integration is set to invalid (“---------”).
A
If the memory alarms are set, there is a danger of a data loss. The
data must be read out of the recorder without delay.