JUMO 705040 mTRON T - Router Module Operating Manual - Manual (Page 27)

27
4 Identifying the device version
4.1 Nameplates
The position and content of the nameplates is explained below using the example of the multi-
channel controller module 705010.
Position
The nameplate (B) is affixed to the module case.
Additional nameplates with reduced information are located on the module insert (A) and inside
the module case (C; not shown). This duplicate identification marking via nameplates (A) and
(C) is important when replacing a module insert or retrofitting optional modules.
Content
The nameplates contain important information. This includes:
Device type
Compare the specifications on the nameplate with the order.
Identify the supplied device version using the order details of the respective module.
Part no. (TN)
The part no. clearly identifies an article in the catalog. It is important for communication
between the customer and the sales department.
(A) (B)
Description Designation on the name-
plate Example
Device type (A + B + C) Typ 705010/18-113-36
Part no. (A + B + C) TN 00XXXXXX
Fabrication number (A + B + C) F-Nr 0070033801211010006
Voltage supply (B) - DC 24 V +25/-20 %