JULABO FPW50-HL Refrigerated Circulators - Manual (Page 6)

Operator responsibility – Safety recommendations
6
2. Operator responsibility – Safety recommendations
The products of JULABO ensure safe operation when installed, operated, and maintained according to
common safety regulations. This section explains the potential dangers that may arise when operating
the circulator and also specifies the most important safety precautions to preclude these dangers as far
as possible.

The operator is responsible for the qualification of the personnel operating the units.
 The personnel operating the units should be regularly instructed about the dangers involved with
their job activities as well as measures to avert these dangers.
 Make sure all persons tasked with operating, installing, and maintaining the unit have read and
understand the safety information and operating instructions.
 When using hazardous materials or materials that could become hazardous, the circulator may be
operated only by persons who are absolutely familiar with these materials and the circulator. These
persons must be fully aware of possible risks.
If you have any questions concerning the operation of your unit or the information in this manual, please
contact us!
Contact
JULABO GmbH
Eisenbahnstraße 45
77960 Seelbach / Germany Tel. +49 (0) 7823 / 51-0
Fax +49 (0) 7823 / 24 91
[email protected]
www.julabo.de
Safety instructions for the operator:
 You have received a product designed for industrial use. Nevertheless, avoid strikes to the
housing, vibrations, damage to the operating-element panel (keypad, display), and contamination.
 Make sure the product is checked for proper condition regularly (depending on the conditions of
use). Regularly check (at least every 2 years) the proper condition of the mandatory, warning,
prohibition and safety labels.
 Make sure that the mains power supply has low impedance to avoid any negative effects on
instruments being operated on the same mains.
 This unit is designed for operation in a controlled electromagnetic environment. This means that
transmitting devices (e.g., cellular phones) should not be used in the immediate vicinity.
Magnetic radiation may affect other devices with components sensitive to magnetic fields
(e.g., monitors). We recommend maintaining a minimum distance of 1 m.
 Permissible ambient temperature: max. 40 °C, min. 5 °C.
 Permissible relative humidity: 50% (40 °C).
 Do not store the unit in an aggressive atmosphere.
 Protect the unit from contamination.
 Do not expose the unit to sunlight.
Appropriate operation
Only qualified personnel is authorized to perform configuration, installation, maintenance and repairs of
the circulator.
Routine operation can also be carried out by untrained personnel who should however be instructed by
trained personnel.