Brother HL-1260E - Manual (Page 66)

USER’S GUIDE
3–16
Fig. 3-5 Cassette Feed
Manual Feed
When you set paper in the multi-purpose tray with the setting MANUAL
FEED = ON selected with the FEEDER switch, the printer loads paper
only from the multi-purpose tray regardless of the previous feeder
selection. When you select the setting PAPER IN = CONT in the MP TRAY
SETTING mode, the printer loads paper automatically from the multi-
purpose tray. When you select the setting PAPER IN = STOP, the printer
waits for you to press the SEL key to start printing. You can set the paper
feed mode and the paper size with the FEEDER switch. For further
information, see
“FEEDER Switch” in Chapter 4.
✒ Notes
When you feed paper manually, note the following:
•
If your application software supports a manual feed selection in the
print menu, you can select it through the software. Since the software or
command setting overrides the switch setting, you do not need to set the
manual feed mode and the paper size with the FEEDER switch.
•
If you use pre-printed paper in the multipurpose tray, please note that it
is inserted with the pre-printed side face up. Insert the top of the page
towards the printer in the multi-purpose tray.
Multi-purpose
Tray (MP)
Upper Paper
Cassette (Tray 1)
Lower Paper
Cassette (Tray 2)