Brother HL-1260E User Manual
Page 200
USER’S GUIDE
Appendix–6
✒ Note
The manufacturer neither warrants or recommends the use of any particular
paper. The operator is responsible for the quality of paper used with the
printer.
Paper Types to Avoid
Some types of paper might not perform well or may cause damage to your
printer.
Types of paper to avoid are:
1. Highly textured paper.
2. Smooth or shiny paper.
3. Paper that is coated or has a chemical finish.
4. Damaged, wrinkled or prefolded paper.
5. Paper exceeding the recommend weight specification specified in the
manual.
6. Paper with tabs and staples.
7. Letterheads using low temperature dyes or thermography.
8. Multipart or carbonless paper.
DAMAGE OR OTHER DEFECTS CAUSED BY THE USE OF
PAPERS LISTED UNDER “PAPER TYPES TO AVOID” WILL NOT
BE COVERED UNDER ANY WARRANTY OR SERVICE
AGREEMENTS.
■
■ ENVELOPES
Most envelopes will perform acceptably on your printer. However; some
envelopes will have feeding and print quality problems because of their
construction. A suitable envelope should have edges with a straight, well
creased folds and should not have more than two thickness of paper along
the lead edge. The envelope should lie flat and not have baggy or flimsy
construction. Purchase quality envelopes only from a supplier who
understands that the envelopes will be used in a laser printer. All envelopes
should be tested prior to use to ensure desirable print results.
Envelope Types to Avoid
1. Envelopes constructed with a paper with a weight that exceeds the
paper weight specifications for the printer.
2. Poorly manufactured envelopes with edges that are not straight or
consistently square.
3. Envelopes with “baggy” construction or folds that are not sharply
creased.
4. Envelopes with transparent windows, holes, cutouts or perforations.