Brother HL-1260E - Manual (Page 112)

CHAPTER 4 CONTROL PANEL
4–45
BUZZER SETTING
You can turn the buzzer of this printer on or off. If any errors occur and the
buzzer is turned on, the printer beeps to alert you. If it is turned off, it does
not sound to alert you.
Display Message Buzzer
BUZZER=ON Turn on the buzzer. (Factory setting)
BUZZER=OFF Turn off the buzzer.
SCALABLE FONT
✒ Note
The setting in this mode menu is effective only in the HP LaserJet 4+ mode.
It does not appear in any other emulation modes.
Since this printer has many scalable fonts, some application programs may
not be able to handle them correctly. When the HP LaserJet 4+ emulation
mode has been selected, the printer may print a different font rather than the
font you have selected with your program (or the font selection command).
To cope with this font problem, you can restrict the font selection by this
command as follows:
Display Message Scalable Font
FONT=ALL All scalable fonts of this printer can be
selected with the font selection command.
For fonts, see “RESIDENT FONTS” in
Appendix. (Factory setting)
FONT=LJ4 Scalable fonts of this printer other than the
following can be selected with the font
selection command: Atlanta, Bermuda
Script, PC Brussels, Copenhagen, Germany,
Portugal, Calgary, San Diego, and US
Roman.
Even if you restrict the font selection as above, you can select among all the
scalable fonts with the FONT switch. The setting in this mode menu merely
restricts the font selection command.