INFICON Maxtek PM-700 Plating Monitor - Manual (Page 11)

PM-700 SERIES PLATING MONITOR
3
Plate/Deplate
Current Supply:
Range: 0 to ± 22.12 ma.
0 to ± 1.615 ASD (amp per sq. decimeter)*
0 to ± 15 ASF (amp per sq. foot)*
* For standard crystal electrode area of 1.37 cm
2
Resolution:
0.05%
Linearity: 0.1%
Accuracy: ± (0.5% of value + 0.1% full scale)
Compliance: ± 4 Vdc
RS-232
Interface:
Connector: 9 Pin, Male, D shell (IBM AT type)
Baud Rate: 9600, Full Duplex
Format: 8 bits, No parity, 1 Stop bit
Environmental:
Operating Temperature: 0 to 50
o
C.
Storage Temperature: -40
o
to +70
o
C.
Humidity: Up to 95% relative humidity at or below +40
o
C;
to 75% relative humidity from +41
o
to +50
o
C.
Power
requirement: 90 VRMS to 140 VRMS or
200 VRMS to 260 VRMS
at 47 to 63 Hz, 25W.
Physical
Dimensions:
Height:
89 mm (3.5 in.)
Width: 216 mm (8.5 in.)
Depth: 235 mm (9.25 in.)
Net Weight: 8.3 kg (3.75 lbs.)
Shipping Weight: 11.3 kg (5.1 lbs.)