INFICON Sensistor ILS500F Leak Detection System - Manual (Page 37)

Using the ILS500 F 37
ninp69e1-a (1410)
6.2.2 Place the Test Object
1 Place the test object in the Test Chamber or connect it to one, two or more
connection ports.
2 Connect any extra equipment needed.
6.2.3 Perform Tracer Gas Filling
Tracer Gas Filling
1 Press Start on the ILS500 F.
2 Perform a tracer gas leak test.
3 Press Stop on the ILS500 F to remove the tracer gas.
Caution
If ISH2000 is put into operation with ILS500 F the sensor withstands temporary
exposure to hydrogen concentration up to 100%. Avoid long exposures to high
concentrations.