INFICON Sensistor ILS500F Leak Detection System - Manual (Page 30)

30 Menu System
ninp69e1-a (1410)
5.3 Menu Overview
For information about parameter factory default settings, see on page 88.
Notice If the instrument is equipped with a Leak Detector ISH2000, some settings
are blocked. These settings are made via the ILS500 F operator panel.
Load Recipe
Settings Hardware Setup
Test Settings Tooling Connection
Pre Evacuation
Gross Leak Test Vacuum Decay Test
Pressure Decay Test
Tracer Gas Filling
Blockage Test
Tracer Gas Test
Gas Evacuation
Tooling
Disconnection
Advanced Settings Timers
Pressures
Options
ISH2000
Service Menu Outputs
Inputs
Analog Inputs
System Reset
ILS500
RS232
Service Run
Hardware Test
Passwords
IP-Settings
Calibration Settings
Recipes
Statistics
Region Time Zone, Region
and Daylight
Time and Date
Language
Info