INFICON Sensistor ILS500F Leak Detection System - Manual (Page 14)

ILS500 F Description 14
ninp69e1-a (1410)
3.3 Configuring Ports and Interfaces (Electrical)
Port/Interface Connect
Leak Detector ISH2000 or T-Guard.
Safety Interface Emergency Stop Circuit.
Power Input Power Cable.
Probe Control Port Pin-to-pin cable
(for external mounting of ISH2000 Leak Detector).
Control Output Optional External Valves.
Tooling Interface External sensors for tooling control.
Status Output Light Tower etc.
Input 1 (optional) Analogue Input
(not supported by std software).
Digital Input
(not supported by std software).
Input 2 Active Holder for Hand Probe
(if ISH2000 Leak Detector is connected).
Ethernet Ethernet
(remote view and control of touch panel).
Printer Port/RS232 Serial Printer.
Logging Device
(e.g. PC).
Remote Control
(START, STOP etc.).