FasTest Bail Handle Gas Connectors - Manual (Page 6)

FasTest, Inc. 1646 Terrace Drive Roseville, MN 55113 Support: (800) 444-2373 Fax: (651) 645-7390 www.fastestinc.com 4
Bail Handle Compressed Gas Connectors
operatIon
step 3
connecting to the cylinder/good connections
correct Handle positioning
580 rpV pin retraction
Figure 5a. note how the pin
is extended
Figure 6a. Demonstrates
good connection to CGA
346 or CGA 540
Figure 6b. use minimal
force on bail
Figure 7a. Demonstrates
good connection to CGA 580
or CGA 590
Figure 7b. use minimal
force on bail and handle
Figure 5b. Push down Figure 5c. Rotate 90° Figure 5d. Retracted
Figure 8a. Correct positioning: handle rests at a
downward angle to connector body
note
Pin retraction is shown using FasTest tool G580RPVPT.
Retraction may also be done using standard pliers