FasTest CalMate Series - Manual

OPERATING INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP018 10/14/2010
1/8” NPT TEST
PORT
Connector Maintenance:
•
A daily, weekly and periodic inspection of the connector by competent
person is recommended. User must establish a regular interval for
maintenance as determined by the user media and operational
environment.
•
Difficulty of operation after continual use indicates a need for lubrication
or other maintenance.
•
Use only original FasTest spare parts that are designed for the
application and are subject to strict quality control. See Warranty.
Safety Warnings – Guidelines:
•
If instructions are not completely understood by operator or components
are missing, contact FasTest before attempting use of the connector.
•
FasTest Connectors are not internally valved, and will not prevent loss of
media when disconnected. Do not attempt to disconnect unless safe
conditions are met.
•
FasTest Connectors must only be used with test pieces of a specific size
as indicated by the part number. Improper use could cause separation of
the connector from the test piece resulting in physical harm or damage.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months from the date of the
sale by FasTest, Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in
accordance with FasTest, Inc. recommendations and/or instructions. FasTest, Inc. is not liable for consequential or
other damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly
arising from the use of or inability to use its products either separately or in combination with other products. ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT
LIMITED TO WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.
CalMate (SA) Ferrule Connectors
Description: CalMate Series Ferrule Connectors Seal on
Sanitary Tube Fittings.
CalMate Connectors provide a reliable leak-tight connection
that grips ands seals on ferrule fittings and gaskets. Simply
insert ferrule fitting and twist sleeve until tight.
Please thoroughly read and understand these operating
instructions prior to operating the connector. The use of
pressurized media for sealing and testing requires a thorough
understanding of the FasTest CalMate Operating Instructions.