FasTest FasMate FX Series Thumb Valve Rebuild User Manual
Rebuild instructions, Fasmate thumb valve rebuild kit rfv100
REBUILD INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP126, Rev A, 10/2/2013
5. Install new o-ring onto connector.
6. Thread valve housing assembly back onto connector.
Safety-General Guidelines:
•
Test/operate connector with pilot pressure only prior to applying media pressure to
termination port.
•
Use only in a safe environment.
•
Connectors are NOT designed for permanent connections and are for temporary
connections only.
•
DO NOT EXCEED pressure rating as marked on connector or corresponding
literature.
•
Use only original FasTest spare parts that are designed for the application and are
subject to strict quality control. See warranty.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 1 year from the date of the sale
by FasTest, Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in ac-
cordance with FasTest, Inc. recommendations and/or instructions. FasTest, Inc. is not liable for consequential or oth-
er damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly aris-
ing from the use of or inability to use its products either separately or in combination with other products. ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.
FasMate
Thumb Valve Rebuild Kit RFV100
Description: Rebuild Procedure for Thumb Valve Cartridge and
Housing Seal Kits for FN & FX FasMate Connectors.
Connectors Covered By This Instruction Are As Follows:
• FNV Connectors, Body Sizes 1 - 5.
• FXV Connectors, Body Size 1 & 2.
Please thoroughly read and understand each of the following procedures on
Thumb Valve Cartridge and Housing rebuilds.
Basic/Common components.
FNV STYLE CONNECTOR
FXV STYLE CONNECTOR
THUMB VALVE
SPRING PIN
HOUSING
O-RING