EUCHNER AS - Manual (Page 31)

Safety Monitors - AS-i Quick Reference - 08/2014 31
4 Software ASiMon
4.1 Diagnostics with Software ASiMon
Display
Colour Meaning
green,
continuous Device is in the ON state (switched on)
green,
flashing Device is in the ON state (switched on), but already in the process
of being switched to the OFF state, e.g. switch-off delay
yellow,
continuous Device is ready, but still waiting for another condition, e.g. local
acknowledgement, diagnosis stop or start button
yellow,
flashing A (start) test must be performed, bring slave into OFF state and
then into ON state
red,
continuous Device is in the OFF state (switched off)
rot,
flashing The error lock is active, release by means of one of the following
actions:
Reset of error condition with the Service button
Power OFF/ON
AS-Interface bus OFF/ON
grey,
off No communication with the AS-interface slave
circuit diagram display
With Strg + T and Strg + S can be switched between circuit diagram display and tree
structure display
Tree structure display