Set outputs of the slaves, 8 set outputs of the slaves – EUCHNER AS User Manual

Page 25

Safety Monitors - AS-i Quick Reference - 08/2014

3.8 Set outputs of the slaves

With this function the outputs of the slaves can be tested.

1. Press OK-button

2. Select TEST and press OK-button

3. Select AS-I circuit in which is the Slave and press OK-button

4. Press OK-button

5. Select BINARY OUTPUTS and press OK-button

6. Select desired Slave by arrow buttons and press OK-button.
7. Set output by arrow buttons and press OK-button to go to the next output

1 OFF 2 OFF

3 OFF 4 OFF

PROFIBUS
QUICK SETUP
AS-I SAFETY
DIAGNOSIS
SLAVE ADR TOOL
TEST
SETUP
DISP CONTRAST

WARNIG:
OUTPUTS MAY BE
SET AND HOST MAY
LOOSE CONTROL.

AS-I CIRCUIT

BINARY OUTPUTS

D3…D0

1A -

0 0 0 0

2A -

0 0 0 0

…

SLAVE TEST TOOL
BINARY INPUTS
BINARY OUTPUTS
ANALOG INPUTS
ANALOG OUTPUTS
PARAMETERS