ElmoMC Multi-Axis Motion Controller-Gold Maestro - Manual (Page 14)

Gold Maestro Installation Guide Installation
MAN-GOLD-MAESTRO-IG (Ver. 1.301)
www.elmomc.com
14
4. The part number at the top gives the type designation as follows:
GOLD-MAESTRO01: 13 to 96 VDC power supply
GOLD-MAESTRO02: 20 to 196 VDC power supply
5. Verify that the Gold Maestro type is the one that you ordered.
6. Verify that you have CAN termination resistors (dongles), illustrated below.
3.3. Connectors
3.3.1. Connector Types
The Gold Maestro has the following connectors:
Pins Type Function
Bottom Connector
3 Phoenix 3.81 mm Pitch
Header
Power and ground
Front Connectors
8 RJ-45 EtherCAT In
8 RJ-45 EtherCAT Out
8 RJ-45 CAN1
8 RJ-45 CAN2