Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) - Manual (Page 94)

Chapter 7: Upgrading the firmware
90 TruVision DVR 10 User Manual
2. Select the USB upgrade mode.
Connect a USB flash memory to the TVR 10 and confirm that the firmware file is in
the root directory. Click USB to start the upgrade.
Note: The firmware must be downloaded to the USB main directory and the file
named “digicap.”
3. When finished, right-click or press ESC to return to the main menu.
4. Reboot the TVR 10.
Upgrading through the Web browser
You can log in to the TVR 10 Web browser to perform a firmware upgrade. Prior to
upgrade, ensure that you have the digicap.DAV file in the workstation you are
accessing the TVR 10 from.
To upgrade the firmware through the Web browser:
1. Log in to the TVR 10 Web browser.
2. Select the Configure button.
3. Select the Others tab.
You will need to scroll right through several tabs to locate the Others tab.
4. Click Remote Upgrading.
5. Click Explore and locate the digicap.DAV file in your workstation.
6. Click Upgrade. You will receive a prompt asking you to reboot the TVR 10.
7. Click Reboot to reboot the TVR 10.