Barco SLM R12+ - Manual (Page 68)

7. Random Access Adjustment Mode
The Load menu displays the corresponding files depending on the installed filter.
LOAD FILE
FILTER LIST [All]
Filename Src resolution
video525.s01 1 675x240i
video525.c01 1 675x240i
video525.c02 1 675x240i
----------------------------
Active file : Video525.c50
Select with ↑ or ↓ , →
to accept
to return
Menu 7-6
Changing the filter setting
1. Push the cursor key ↑ or ↓ highlight filter list.
2. Press ENTER to toggle the annotation between brackets.
[All] : all files that can be loaded will be displayed.
[Fit] : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing is found
within this small area, the projector continues searching until it finds something).
How to load a file ?
1. Push the cursor key ↑ or ↓ to select the best fitting file.
LOAD FILE
FILTER LIST [All]
Filename Src resolution
video525.s01 1 675x240i
video525.c01 1 675x240i
video525.c02 1 675x240i
----------------------------
Active file : Video525.c50
Select with ↑ or ↓ , →
to accept
to return
Menu 7-7
2. Press ENTER to select.
A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on.
CONFIRM
LOAD FILE
create file
Video525.c02
based on file
Video525.s01?
to return
to return
Menu 7-8
3. Press ENTER to confirm the new creation or EXIT to return to the load file menu.
During a load file, the actual file is displayed next to the indication Active file.
When scrolling through the files, the image will be adapted according to the settings of the selected file (on
line adaptation).
The image is not perfect ?
If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File
settings.
64 R5976654 SLM R12+ 27/01/2005