Barco SLM R12+ - Manual (Page 141)

B. Built-In Dust Filters
B. BUILT-IN DUST FILTERS
B.1 Built-In Dust Filters first series projectors
Overview
• Dust filter on the front side
• Dust filter on the back side
• Dust filter on the bottom side
W ARNING : As the projector has to be opened, this procedure has to be performed by qualified service tech-
nician.
B.1.1 Dust filter on the front side
Necessary tools
• Allen key 8mm
• Flat screw driver 5mm
• Philips screwdriver
What should be done
To get access to the front dust filters, the top cover must be removed.
How to remove
1. Take off the lens (see chapter lenses).
2. Turn out the bolts securing the stacking sockets.
Image B-1
Removing stacking sockets
3. Remove the stacking sockets.
4. Loosen the security screw of the input box.
R5976654 SLM R12+ 27/01/2005 137