COATS 1001 & 1001SC Balancer - Manual (Page 7)

COATS 1001 Wheel Balancer • 1
Direct Drive
Specifications
• 5/16 Allen Wrench
• Single spin dynamic/static, twin plane.
• Vertical wheel mounting.
• Backcone and light truck cone mounting systems
standard.
• Accuracy ± 0.1 ounce (or ± 3 gram).
• Exclusive direct drive system (no belt - no pulleys).
• Forced air cooling.
• Cycle time - 4 1/2 seconds (standard tire).
• Rim diameter 10-17 inches.
• Fully interlocked guard hood (safety feature).
• Maximum tire diameter 42 inches.
• Shipping Weight 650 lbs.
• Fewest moving parts of any balancer.
• Large dials for data entry.
• “No bolt down” installation.
• Static/mag feature.
• Large readout in 1/4 ounce or 1/10 ounce or gram
increments.
• Greater distance from shaft to machine (better for
front wheel drive application).
• 1 1/2 H.P. modified torque motor:
Large housing for heat dissipation.
Motor insulation - heavy duty for high tem-
perature application.
Motor rated for 900 RPM use.
• Oversized weight bins.
• Standard adapters fit.
• ABS hood.
• Removable shaft for closed-center wheels.
• Control panel positioned for best visibility.
• Easy to read position lights.
• Scratch resistance surface.
• On-Off switch.
• Electronics isolated from motor heat.
• Simple calibration.
• Automatic rim gauge return.
• Strategically numbered dials for easy reading.
• 6-12-24 month guarantee.
Power Requirements
Standard: Optional: (Factory Installed)
220 VAC 115 VAC 220 VAC
20 AMPS 20 AMPS 20 AMPS
60 Hz 60 Hz 60 Hz
3 Phase 1 Phase 1 Phase
Standard Package
Includes balancer with built-in 17 bin weight tray,
interlocked guard hood, passenger car backcone
mounting system and light truck cone, 6 accessory
pegs, instruction manual, wheel weight tool and
calipers.