CHAMPION PP-28 Manual User Manual
Page 15
7
Installation of Dish Tables
1. Load and unload machine openings are 28-7/8”, therefore, table width should be 29” with a
3/4” turned down lip. (33-1/2” max entry).
2. The formed down lip of the dishtable should be placed inside the machine. The dishtable
should be pitched toward the dishwasher for proper draining by adjusting its leveling feet.
The dishtable should be sealed to the dishwasher.
Completing Installation
WARNING:
Do not insert racks into machine before tanks fill with water. Operating pumps dry will cause
pump seal damage and leakage that can result in a motor failure.
1. Remove any foreign material from inside the machine.
2. Check to ensure that drains and overflow pipes are operational and sealed.
3. Position scrap screens on supports above the tanks.
4. After plumbing and electrical connections are completed, fill the tank and wait 10
minutes. Check all plumbing connections for leaks.
5. Drain the tank and check the drain lines for leaks.
INSTALLATION