Caron 6545 - Manual (Page 21)

6540 Series Operations Manual Rev_I.docx 4/7/2014 21
Test Setup: Exposure Test
1. From the main screen, press desired light test setup (UVA) or (VIS) button. (UVA used
in example)
2. Press (TEST SETUP) button.
3. Choose (EXPOSURE TEST).
4. Press (NEXT) button.
5. Using (UP), (DOUBLE UP), (DOWN), and (DOUBLE DOWN) arrow
buttons, set the desired test conditions.
6. Press (EXIT) button
Page 1 of 2
Next button
Page 2 of 2
Exposure duration
set point
Estimated time
remaining based on
current lamp brightness
Large increase /
decrease in exposure
level set point
Small increase /
decrease in exposure
level set point