Caron 6545 - Manual (Page 19)

6540 Series Operations Manual Rev_I.docx 4/7/2014 19
Light Control
Control Lights Manually
1. From the main screen, press desired light test setup (UVA) or (VIS) button. (UVA used
in example)
2. Press (TURN LIGHTS ON) button. Lights should come on.
Note: If the (TURN LIGHTS ON) icon is not a button and the corresponding description is
grey, then a test is running. The lights can’t be controlled manually during a test.
3. Press (EXIT) button.
To manually turn lights off, repeat the same procedure except in step #2, press (TURN LIGHTS OFF).
Exit button
Turn lights on
(manual) button
Selected lamp type icon
& screen description
Turn lights off
(manual) button
‘Check’ indicating
lights status
Intensity control
button (optional)
View testing
details button
Test setup button
Test control buttons