Caron 6545 - Manual (Page 20)

6540 Series Operations Manual Rev_I.docx 4/7/2014 20
Light Dimming Control (6540-2, 6540-3, 6545-2, 6545-3)
1. From the main screen, press desired light test setup (UVA) or (VIS) button. (UVA used
in example)
2. Press (LIGHT INTENSITY) button.
3. Press (DIMMING) button. The light intensity set point will display a value.
4. Using (UP) and (DOWN) arrow buttons, set the desired light intensity.
5. Press (EXIT) button
To turn lights on full power, repeat the same procedure except in step #3, press (FULL POWER).
‘Check’ indicating
lights dimming
status
Forces light on
maximum brightness
Light intensity
set point
Allows dimming and
controls to set point