BAND-IT IT5000-AB 3/8 Junior Tool - Manual (Page 22)

Document # I17795 Rev G
© Copyright
BAND-IT-IDEX, Inc. 2009
All rights reserved
www.BAND-IT-IDEX.com
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver, CO 80216-0307 USA
P: 1-800-525-0758 F: 1-800-624-3925
22 of 38
IT5000-AB
3/8” Junior
® Tool
Production tools will experience wear of specific parts. Preventative maintenance, including
regular cleaning and lubrication, will reduce the replacement frequency of these parts. To
maximize life, use synthetic gel lubricant containing Teflon. See (pages 22-28) for tool
maintenance. When repairing tools, threaded fasteners should be secured using a small
amount of Loctite, Blue - Medium strength being careful to apply sparingly.
*Note
– A basic IT5000 Repair Parts Kit is now available.
Please have tool model and serial #’s available when calling the factory for service
assistance. Contact BAND-IT-IDEX customer service, 800-525-0758.
Part numbers are subject to change.
Part #
*Replacement Parts
Description
Quantity
per Tool
I18687 Knife 1
I13887 Knife Pin 1
I17687 Knife Mounting Screws 2
I18787 Blade 1
I20487 Blade Pin 1
I19587 Front Gripper 1
I19190 Tension block assembly (Includes tension pin, gripper,
springs and block) 1
M54399 Flip Cover Assembly (Includes assembled flip cover and
2 quick release pins) 1
I16387 Lubricant (synthetic gel lubricant containing Teflon)
Maintenance